And Then, Back I Go...

   For reasons not yet fully understood, something went click in my head today. This click was activated after checking Nourishing Obscurity and  clicking to the fairly frequent posts regards transport, primarily bicycles – yeah, right – cars and occasionally trains. Trains was the head click and sent me on a Foggy search. Oh wot an excitement filled Sunday...
   This search ended in 2014. I was going to pass this along to N.O. as a comment but it seemed a tad long so it’s here, again, and should N.O. wish to nick it, as indeed did I, for use in any future train piece, and assuming I’m not way too late with this, please feel free so to do.
   It’s an historically interesting piece with an absolute beauty of a final sentence. Enjoy.

"Say friend, did you know that the US Standard railroad gauge (distance between the rails) is 4 feet 8 1/2 inches?”
”That's an exceedingly odd number. Why was that gauge used?”
”Because that's the way they built them in England, and the US railroads were built by English expatriates.”
“I see, but why did the English build them like that?”
”Because the first railway lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used over there.”
“Well, why did they use that gauge?”
”Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing.”
“Okay! Why did their wagons use that odd wheel spacing?”
”Because, if they tried to use any other spacing the wagon wheels would break on some of the old, long distance roads because that's the spacing of the old wheel ruts.”
“So who caused these old rutted roads?”
”The first long distance roads in Europe were built by Imperial Rome for the benefit of their legions. The Roman roads have been used ever since.”
“And the ruts?”
”The original ruts, which everyone else had to match for fear of destroying their wagons, were first made by the wheels of Roman war chariots. Since the chariots were made for, or by Imperial Rome, they were all alike in the matter of wheel spacing.  Thus, we have the answer to the original question. The United States standard railroad gauge of 4 feet 8 1/2 inches derives from the original specification for an Imperial Roman army war chariot.
“And the motto of the story is specifications and bureaucracies live forever. So, the next time you are handed a specification and wonder what horse's ass came up with it, you may be exactly right. Because the Imperial Roman chariots were made to be just wide enough to accommodate the back-ends of two war-horses.”
“So, just what does this have to do with the exploration of space?”
”Well, there's an interesting extension of the story about railroad gauge and horses' behinds. When we see a Space Shuttle sitting on the launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are the solid rocket boosters, or SRBs. The SRBs are made by Thiokol at a factory in Utah. The engineers who designed the SRBs might have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site.  The railroad from the factory runs through a tunnel in the mountains and the SRBs had to fit through that tunnel. The tunnel is slightly wider than a railroad track, and the railroad track is about as wide as two horses' behinds.
”So a major design feature of what is arguably the world's most advanced transportation system was originally determined by the width of a horse's ass.”

Quote;  Ed Catmull.

“Driving the train doesn’t set its course. The real job is Laying the track.”